Shuliy의 소형 이동식 태양건조기는 가정용, 개인, 소규모 생산자를 위해 설계된 새로운 형태의 건조 설비입니다. 채소, 과일, 곡물, 고기 등을 건조하는 데 사용할 수 있습니다.
The temperature of this mini solar dryer is automatically controlled by an intelligent thermostat. The working temperature can be adjusted between 30°C and 60°C. It is equipped with a 50W solar panel that powers a 12V DC fan, with a daily drying capacity of 20–100 KG.
이 제품은 작고 융통성이 뛰어나며, 전력이 제한된 지역에 이상적입니다. 먼지와 비 같은 전통적인 노천 건조의 문제를 방지하고 건조 속도, 제품 품질, 색상을 개선합니다. 태양에너지를 이용해 열을 생성하므로 많은 전력을 절약하고 경제적이며 녹색이고 에너지 절약적인 해결책입니다.
태양건조 원리
태양 건조기는 주로 태양광 패널과 태양열 변환을 이용하여 건조 과정을 완료합니다. 팬을 구동하여 공기를 순환시키고 태양열로 공기를 데워 재료를 고르게 건조시키며, 전체 시스템은 청정하고 에너지 절약적이며 저비용의 밀폐형 건조 시스템입니다.
작업 과정
1. 태양광 공급
상단의 50W 태양광 패널(18V DC)이 햇빛을 흡수하여 전기로 변환합니다.
이 전력은 12V DC 팬을 구동하여 공기의 순환을 유지합니다.
2. 공기 가열 및 순환
건조실은 양면 아연도금 보온 패널로 구성되어 두께가 50mm로 일정한 온도 유지를 돕습니다.
내부 공기는 태양 복사에 의해 가열되고 팬이 뜨거운 공기를 각 건조 트레이를 통해 고르게 순환시킵니다.
재료의 균일한 가열과 수분 증발 속도 증가를 보장합니다.
3. 제습 및 온도 제어
증발 후 습한 공기는 상단 또는 측면의 조절 배출구(Φ150mm 회전 배출구)를 통해 배출됩니다.
내장된 지능형 온도 제어 시스템은 온도를 30°C에서 60°C 사이로 자동으로 모니터링하고 유지하며, 다양한 재료에 맞게 조정 가능합니다.
4. 밀폐 보호 구조
상부 커버는 알루미늄 합금 프레임의 저철성 무늬 강화유리로 만들어져 있어 빛 투과성, 압력 저항성 및 부식 보호가 우수합니다.
건조 과정은 완전히 밀폐되어 먼지, 벌레, 비가 내부로 들어오는 것을 효과적으로 차단하여 청결하고 고품질의 제품을 보장합니다.
태양건조기의 구조
Structural overview
The solar drying machine is composed of a drying box main body, solar panels, a circulating fan, a dehumidifying fan, an intelligent temperature and humidity control system, trays, casters, and PTC electric heaters.
- The drying box
The outside box is a large oven, it was made of a 5cm double-sided galvanized sheet, and the frame is supported by a 6cm stainless steel bracket. The upper cover plate is a 32 mm-thick low-iron toughened glass, surrounded by an aluminum alloy electrophoretic frame; the workmanship is well-fitted to ensure overall thermal efficiency.
2. Internal structure
All four internal walls are equipped with heat-absorbing panels, and the surface is filled with dense small holes to help absorb solar radiation to the maximum and improve thermal efficiency.
3. Solar panel
The size of the solar panel is 530*410mm. It is installed on the left side of the solar drying box. It can be folded when not in use, which is convenient and practical.
4. Circulating fan and dehumidifying fan
Both are driven by High-power fans, hot air circulation devices, and moisture discharge devices.
Automatic control device
The control system adopts embedded installation, which is safer and more beautiful. It can achieve temperature and humidity automatic control. The equipment will automatically stop when reaching the required temperature and humidity.
Stainless steel tray
The inner tray and the bracket of the box body can be flexibly combined with a 40X40 perforated structure, and the height and the distance between the trays can be adjusted freely. Galvanized screws can be easily adjusted with a screwdriver. There are rollers on the bottom, which are convenient to push in and pull out, which is also conducive to transportation between the warehouse and the solar drying box. The tray size is 59X40X2cm, and the material is stainless steel 304 sanitary grade to ensure product quality.
Casters
There are four casters at the bottom of the box, two for guiding and two for positioning, which makes it convenient and flexible to move.
태양광 건조기의 장점
- Compact and portable: The dryer is small, measuring 2 m long, 1 m wide, and 1 m high. It is easy to move. With wheels, it can be pushed by hand or towed by a small tractor, tricycle, or mower, allowing it to be placed in sunny spots or moved between households.
- Sturdy and ready to use: The structure is strong and requires no installation. It is low-cost, highly efficient, and ready to use immediately.
- Adjustable temperature: The drying temperature can be set between 30–60°C to meet the needs of different materials.
- Multipurpose and protective: It protects materials from flies, pests, rain, and dust while being suitable for multiple types of drying tasks.
- Long lifespan: Designed without easily worn parts, the dryer can last up to 25 years.
태양광 식품 건조기의 응용
소형 이동식 태양건조 오븐은 제약, 화학, 식품, 수산물, 경공업, 농업 및 부산물에 널리 사용됩니다.
원재료: 한약재 조각, 가루, 천연 약품, 건조 채소, 식품, 건과일, 소시지, 플라스틱 수지, 고기 등
태양광 탈수기의 매개변수
There are three types of solar dehydrators, and the following are their configuration lists.
Type 1: SL-A solar dehydrator
| Component | 사양 |
|---|---|
| Solar Panel | 50W, 18V DC |
| Top Cover | 3.5 mm low-iron patterned tempered glass with aluminum alloy electrophoresis frame |
| Support Frame | 6 mm stainless steel (SUS304) |
| Handle Material | Stainless steel (SUS304) |
| Chamber Material | Double-sided galvanized panels (5 cm each side, total thickness 50 mm) |
| Circulation Fan | German EBM 12V 16W cast iron, high-temperature resistant |
| Tray Support | Black perforated galvanized C-steel with hand-tightening screws, adjustable size |
| Manual Vent | Adjustable rotating vent, diameter 150 mm |
| 바퀴 | Four 1.5-inch cast iron wheels, each supports 100 kg; two with brakes |
| Stainless Steel Trays | 12 rectangular perforated trays, 600×400×40 mm |
Notes: SL-A is suitable for most materials. It uses a semi-open drying method, fully utilizing solar energy without the need for any additional energy sources.
Type 2: SL-B solar dehydrator
| Component | 사양 |
|---|---|
| Solar Panel | 50W, 18V DC |
| Top Cover | 3.5 mm low-iron patterned tempered glass with aluminum alloy electrophoresis frame |
| Support Frame | 6 mm stainless steel (SUS304) |
| Handle Material | Stainless steel (SUS304) |
| Chamber Material | Double-sided galvanized panels (5 cm each side, total thickness 50 mm) |
| Tray Support | Black perforated galvanized C-steel with hand-tightening screws, adjustable size |
| Circulation / Exhaust Fan | German EBM 12V 16W cast iron, high-temperature resistant |
| Temperature & Humidity Controller | Embedded smart controller for precise temperature control, safe and aesthetically neat |
| 바퀴 | Four 1.5-inch wheels, each supports 100 kg; two with brakes |
| Stainless Steel Trays | 12 rectangular perforated trays, 600×400×40 mm |
Notes: SL-B is based on the SL-A model, with the addition of an exhaust fan that automatically runs intermittently to remove moisture.
Type 3: SL-C solar dehydrator
| Component | 사양 |
|---|---|
| Solar Panel | 50W, 18V DC |
| Top Cover | 3.5 mm low-iron patterned tempered glass with aluminum alloy electrophoresis frame |
| Support Frame | 6 mm stainless steel (SUS304) |
| Handle Material | Stainless steel (SUS304) |
| Chamber Material | Double-sided galvanized panels (5 cm each side, total thickness 50 mm) |
| Tray Support | Black perforated galvanized C-steel with hand-tightening screws, adjustable size |
| Circulation Fan | German EBM 12V 16W cast iron, high-temperature resistant |
| Exhaust Fan | German EBM 12V 16W cast iron, high-temperature resistant |
| Temperature & Humidity Controller | Embedded smart controller for precise temperature control, safe and aesthetically neat |
| 바퀴 | Four 1.5-inch wheels, each supports 100 kg; two with brakes |
| Stainless Steel Trays | 12 rectangular perforated trays, 600×400×40 mm |
| PTC Electric Heater | Ceramic electric heater, 1800W, 220V |
Notes: SL-C is based on the SL-B model, with the addition of an electric heating device. It can dry continuously all day and automatically remove moisture intermittently. This model requires a 220V power supply.
Reference for model suitability by specific material types
- SL-A: Suitable for most fruits (e.g., apples, pears, mangoes, bananas), vegetables (e.g., carrots, tomatoes, chili peppers), grains (e.g., corn, wheat, rice), and herbs (e.g., mint, basil). Best for sunny areas, relying solely on solar energy. Ideal for small-scale or occasional drying.
- SL-B: Suitable for the same materials as SL-A, with the addition of an exhaust fan to remove moisture automatically. Better for high-moisture fruits (e.g., strawberries, tomatoes) and vegetables (e.g., cucumbers, bell peppers) or slightly larger batches.
- SL-C: Suitable for all the above materials and can operate continuously all day. The electric heating device works even when sunlight is insufficient. Ideal for large-scale or continuous drying, such as apple slices, mango slices, chili peppers, and grains
If you have any questions about the model specifications, you can contact us via the pop-up on the right. We will guide you on how to choose the right solar dryer.
태양건조기 수출 사례
Here is the feedback from two customers, showing the results of the dried products.
Solar air drying machine VS. traditional drying method
| 항목 | 전통적 건조(전기 건조) | 태양광 공기 집열식 건조기 |
|---|---|---|
| 건조할 재료 | 원료: 300 kg, 초기 수분 80% , 최종 수분 10% | 동일 |
| 건조 시간 | 6시간 | 6시간 |
| 수분 제거됨 | 233.3 kg | 233.3 kg |
| 건조 방법 | 전기 건조 | 태양광 공기 집열식 건조 |
| 에너지 소비량 | 184 kWh | 4.44 kWh |
| 에너지 가격 | $0.1682 / kWh | $0.1682 / kWh |
| 운영 비용 | $30.96 | $0.74 |
| 환경상 이점(유해 배출 감소) | / | / |
| SO₂ | $0.48 | $0.01 |
| NOₓ | $0.28 | $0.01 |
| 연기 | $0.06 | $0.00 |
| CO₂ | $0.18 | $0.00 |
| 총 환경 이점 | $0.99 | $0.02 |
| 총 운영 비용 | $31.96 | $0.84 |
Summary
Under the same drying load conditions, the operating cost of the solar air drying machine is extremely low, mainly due to minimal power use for the fan and dehumidification systems. It produces no harmful emissions during operation, making it highly environmentally friendly. As long as there is sufficient sunlight, it can utilize abundant natural solar energy freely, clean drying with no cost.
If you need a larger dryer, Shuliy also offers industrial-scale drying rooms and stainless steel dryers, which can meet all your drying requirements.
